The HQ class of racing, is a one make series based on the HQ Holden,
202, 3 speed, 4 door sedan with front disc brakes as produced by GMH
between 1971 and 1974. The class has been designed to produce close
racing at a minimum cost.
Body: HQ Holden Chassis: Standard Chassis Rails and Floor Pan Engine: 202 Red motor maximum .060" oversize. Wade 933 controlled camshaft . Standard crankshaft. Conrods must be standard type. Engine may be blue printed and balanced. Sump may be baffled. Cast pistons only, compression ratio is minimum 45cc. Must be sealed by accredited HQRA Sealer.
Cylinder Head: Valve springs are free, but only one spring per valve (no double valve springs). Valves are free subject to a maximum head size of exhaust 1.375" and inlet 1.675".
Exhaust: Exhaust system is free from cylinder head exit.
Carburettor: Standard six cylinder 202 red motor Stromberg carburettor (one only). Jets are free. Air cleaner - Speco HQ 900 AC - controlled item.
Cooling: Radiator is free but must bolt to original holes. Electric fan may be fitted.
Gearbox: Original 3-speed manual gearbox must be sealed by HQRA Accredited Sealer. Floor shift may be fitted.
Clutch: Method of actuation is free. One ton clutch assembly may be fitted.
Differential: Standard non-limited slip Banjo or Salisbury type Ratio 3.55 to 1, must be sealed by HQRA Accredited Sealer.
Wheel
Alignment: The camber on each front wheel must not exceed 3° negative.
The rear wheel camber must not exceed 0° ± 1° negative.
Suspension: Suspension components are strictly controlled by the use of a " Pedders HQ Racing Kit". All mounting points must remain in original position. All bushings must remain original rubber.
Steering: Non power steering
Brakes: Front disc PBR or Girlock type. Rear drum type. Friction lining type free. Brake hoses maybe replaced with those of aeronautical standard.
Wheels:14"x 7" or 14"x 8" mags or steel rims. Tyres: shall be The Kenda Klever H/P KR 15 P235/60R1496H .
Pump Fuel: A Commercial Fuel , with a maximum ethanol
content of 10%. Pump Fuel shall be available for sale on demand
from a roadside retail bowser outlet at each of at least five separate
service stations in each of at least three Australian States. A mixture
of Pump Fuels with the same hydrocarbon profile is permitted (eg, brands
of unleaded petrol (ULP) may be mixed; 10% ethanol-blended fuels and
ULP may not be mixed, lead replacement additives as per cams rule book).
Minimum Racing Weight: 1365kg (Total weight including driver post race)
*Please note, this is for reference only and a Full technical document should be read with the current CAMS manual for up to date regulations.
CAMS Manual of Motorsport
Specification of Automobiles Group 3H - HQ Holden
View and Download the Group 3H (HQ Holden) section of the CAMS Manual of Motorsport.
Note: The CAMS Manual of Motorsport Group 3H Manual should be read in conjunction with the HQ Racing "Technical Regulations".